Fluorocarbon sprayed aluminum veneer has strong color retention, corrosion resistance and UV resistance. It also prevents cracking in harsh environments. It is not only used for the exterior walls of high-rise buildings, but also has a comprehensive choice of colors. The metal luster is very good, but it also has the advantage of grasping impact resistance, etc. the interior decoration is often designed as fluorocarbon aluminum veneers, such as background walls, ceilings and envelopes often used for beams. Aluminum veneer.

(1) As a high-end decorative material of fluorocarbon aluminum veneer, domestic fluorocarbon aluminum veneer manufacturers also have a large gap in production level. Therefore, when selecting suppliers, we should carefully select them, eliminate their production scale, capacity and project performance, and focus on their technical design ability. Those processing plants and manufacturers with small scale and low production level cannot be selected because of low price, otherwise it will have a great impact on the quality and progress of the project and cause huge economic losses to customers.

(2) Before the processing of fluorocarbon sprayed aluminum veneer, as an important process field data measurement, it is recommended to use infrared range finder for measurement. If the traditional tape measure is used, the measurement error will be generated, which will have a very negative impact on the aluminum plate that needs to be closely connected. Shenzhen aluminum veneer

(3) When processing fluorocarbon sprayed aluminum veneer, not all aluminum sheets shall be processed at one time. The last aluminum plate and corner plate in each installation area shall not be processed temporarily. After the carbon sprayed aluminum veneer is installed, the on-site data measurement shall be carried out again to obtain accurate dimensions for post-processing to avoid unnecessary rework and economic losses. Aluminum veneer manufacturer

(4) Fluorocarbon sprayed aluminum veneer is a kind of metal decorative plate, but its fluorocarbon sprayed layer is easy to scratch. Therefore, in addition to requiring the manufacturer to bring its own protective film, attention should also be paid to avoid scratches and heavy objects during handling and installation, otherwise the overall appearance of the aluminum plate will be seriously affected. Fluorocarbon aluminum veneer

(5) In the installation method of fluorocarbon sprayed aluminum veneer, the most common and difficult quality problem is the uneven joint between the blocks, which should be paid enough attention. In addition to paying attention to the uniform thickness of the adhesive during the construction, the temporary fixing measures shall not be removed prematurely, generally not less than 12 hours.

(6) The base plate shall be bonded and installed with fluorocarbon sprayed aluminum veneer, glass magnesium plate or large core plate with waterproof performance, and paper slate shall not be used. The main reasons are: the strength of the plate itself is low, and the aluminum plate is not firmly bonded; Second, the gypsum board is not waterproof, and various water supply and drainage pipes are generally embedded in the ceiling. In case of local leakage, the aluminum plate will fall off.